Material
Safety Data Sheet
(To the purchaser this MSDS contains important environmental, safety and health
information for your employees who will be using this product. Please be sure that this
information is given to them. If you resell this product a copy of the MSDS should be
given to the buyer.)
Manufacturer's Name :
M.P.Carbon Pvt. Ltd.
Address : 322-324 URLA Industrial Area, Raipur-493221, Chattisgarh State,
India
Phone : 91-771-232-3419
Fax : 91-771-232-6308
Section 1
| Trade Name |
Century Excelmelt |
| Chemical and Common
Name(s) |
Carbon Bonded SIC Refractory |
| Formula |
C+SIC+AL203+SI+GLASS |
Section 2
| Potential
Ingredients |
Percentage |
Remarks |
| SIC |
30-35 |
Total Dust |
| Graphite |
25-35 |
Total Dust |
| AL203 |
4-5 |
Total Dust |
| Silicon / Ferro |
4-12 |
Total Dust |
| SIO2 |
0-10 |
Respirable
Dust |
| silicates |
3-6 |
|
| C (Carbon) |
10-16 |
|
The ingredients are not hazardous and no
exposure will occur with normal use.
Section 3: Physical Data
| Boiling Point |
N/A |
| Specific Gravity |
2.2-2.6gm/cc |
| Vapour Density |
N/A |
| Volatiles |
N/A |
| Vapour Density |
N/A |
| Evapouration Rate |
N/A |
| Solubility |
Negligible |
| Melting Point |
N/A |
| Appearance and Odour |
Black Granular Solid &
No Odour |
Section 4: Fire and Explosion
Hazard Data
| Flash Point |
N/A |
| Flammable Limits |
Lower: N/A Upper: N/A |
| Extinguishing Media |
Not Flammable |
| Special Firefighting Procedure |
None Required |
| Unusual Explosion and Fire Hazards |
None |
Section 5: Reactivity Data
| Stability |
Stable |
| Conditions to avoid |
None |
| Incompatiability |
None |
| Hazardous decomposition products |
None |
| Hazardous polymerisation |
Will not occur |
| Conditions to avoid |
None |
Section 6: Health Hazard Data
| Listed as a carcinogen |
No |
| Symptons and effects if this
product is cut or ground of over exposure |
Nusiance dust so created may cause
irritation of respiratory system. Prolonged exposure a pulmonary problems.respiratable
crystaline silica may cause delayed lung infection. |
| Emergency and first aid procedures |
None |
Section 7: Spill or Leak Procedure
| Steps to be taken incase
material is leaked or spilled |
Collect and sweep up |
| Waste disposable method |
Use a sanitary landfill in
accordance with local, state or central regulations |
Section 8: Recommended Control
Measures
| Respiratory Protection |
If cutting or grinding
article collect and sweep up use approved respirators vetilation local |
| Mechanical |
N/A |
| Special |
N/A |
| Protective gloves |
Recommended, not necessary |
| Eye protection use
goggles if cutting etc other protection equipment |
N/A |
| Special protective measures
for repairs and maintance of contaminated equipment. |
N/A |
Section 9: Special Precaution
| Precaution
to betaken in handling and storing |
None |
Care has been taken in preparation of this
information and M. P. Carbon Pvt. Ltd. extends no warrantees, makes no representation and
assumes no responsibility of this information for any purchasers use or any other
consequences of its use. |
